Top Page > Copy and Document Server Reference > Basic Copying > Copying from the Multi Bypass Tray (Tray 6) > Copying onto Tab Stock from the Multi Bypass Tray (Tray 6)

Copying onto Tab Stock from the Multi Bypass Tray (Tray 6)

When copying onto tab stock, select the type and size of paper.

The Duplex function cannot be performed on tab stock. If [1 Sided 2 Sided] is selected, cancel the setting.

Tab stock is fed starting from the top tab.

Illustration of copying onto tab stock

Originals
Tab Stock
Copies

Place the tab stock print side up on the multi bypass tray (tray 6).

While pinching the release lever, adjust the side fences to the size of the paper.

Multi bypass tray illustration numbered callout illustration

Side fences

Attach the tab fence to the end fence.

Multi bypass tray illustration numbered callout illustration

Tab fence
End fence

Set the end fence.

Multi bypass tray illustration

Press the elevator switch on the multi bypass tray (tray 6).

Select the multi bypass tray (tray 6) on the control panel.

Press the [] key.

Press [Tab Stock] under Special Paper.

Specify the shift value using [] or [] under Tab Position Shift.

Select the paper weight.

Select the paper size.

Press [OK] twice.

Place originals, and then press the [Start] key.

For details about how to load tab stock in paper trays, see Copying onto Tab Stock .
Load tab stock so that it will be fed from the side without the tab first.