Skip header
 

Setting Custom Size Paper Using the Control Panel

Follow the procedure below to set the machine using the control panel when loading custom size paper onto the bypass tray.

Important

  • If you select [Machine Setting(s)] in [Bypass Tray] under [Tray Setting Priority] in [System] of [Printer Features], the settings made using the control panel have priority over the printer driver settings. For details about [System] settings, see "System".

1Press the [User Tools/Counter] key on the control panel.

User Tools/Counter key illustration

2Press [System Settings].

3Press the [Tray Paper Settings] tab.

4Press [Printer Bypass Paper Size].

5Press [Custom Size].

Operation panel screen illustration

If a custom size is already set, press [Change Size].

6Press [Vertical], enter the vertical size of the paper using the number keys, and then press [Hash].

Operation panel screen illustration

7Press [Horizontal], enter the horizontal size of the paper using the number keys, and then press [Hash].

8Press [OK].

The paper sizes entered are displayed.

9Press [OK].

10Press the [User Tools/Counter] key.

The initial screen appears.

Note

  • When loading thick paper, thin paper or OHP transparencies, set paper size and paper type.

  • [Auto Detect] is the default setting for [Printer Bypass Paper Size].

  • For details about setting printer drivers, see the printer driver Help.