



	Manuals Contents Previous Next

Top Page > Troubleshooting > Adding Paper, Toner, Staples, Rings and Glue > Loading Paper > Loading Paper into the Wide Large Capacity Tray > Fanning the Paper

Fanning the Paper

This section describes how to fan a stack of paper before you load it in a paper tray.

If you are loading coated paper in the Wide LCT, it is important that you fan the sheets thoroughly. Misfeeds may occur if paper is not fanned thoroughly.

Loosen the stack by riffling the sheets.
Holding its shorter ends, flex the stack back and forth to create space between the sheets. Repeat this several times.
Make sure there is space between the sheets.