Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
When Synchro Cut is selected, you can create a margin on the copy's leading and trailing edge.
You cannot use the bypass tray with this function.
You can select the following types of margin for this function:
Top Margin: margin at the leading edge of the original (top of copy)
Bottom Margin: margin at the trailing edge of the original (bottom of copy)
Press [Edit / Stamp].
Press [Margin Adj.].
Press [Top Margin] or [Bottom Margin].
Use [
] or [
] to specify the margin, and then press [OK].
[Synchro Cut] is automatically selected.
You can specify the margin from 0 to 200 mm (7.9 inches) in 1 mm (0.1 inch) increments. The default margin is 20 mm (0.8 inch).
You can specify both the top and the bottom margins at a time.
The copy length is the length automatically specified by Synchro Cut plus the margin specified.
If you specify the margin too long for the original, parts of the image might not be copied.
You can change the settings for Margin Adjustment under Edit in User Tools. For details about Edit, see “Edit”.
 |
 | Copyright (C) 2010 |
