Edit

This section describes the User Tools in the Edit menu under Copier / Document Server Features.

Adjust Position

Specify the default setting for Adjust Print Position.

Default: [Bottom 0.8 inch], [Right 0.8 inch]

The range of adjustment is 0 to 200 mm (0 to 7.9 inches) in 1 mm (0.1 inch) steps.

Erase Border Width

Specify the width of erased border margins using this function.

Use the number keys to specify the width of the erased border from 2 to 99 mm (0.1 to 3.9 inches) in 1 mm (0.1 inch) steps.

Default: [0.4 inch]

Erase Original Shadow in Combine

In Combine mode, you can specify whether to erase a 3 mm, 0.1 inch boundary margin around all four edges of each original.

Default: [On]

Image Repeat Separation Line

You can select a separation line using the Image Repeat function from: None, Solid, Broken A, Broken B, or Crop Marks.

Illustration of Image Repeat Separation Line

None
Solid
Broken A
Broken B
Crop Marks

Default: [None]

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inch) in width along the separation line.

Double Copies Separation Line

You can select a separation line using the Double Copies function from: None, Solid, Broken A, Broken B, or Crop Marks.

Illustration of Double Copies Separation Line

None
Solid
Broken A
Broken B
Crop Marks

Default: [None]

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inch) in width along the separation line.

Separation Line in Combine

You can select a separation line using the Combine function from: None, Solid, Broken A, Broken B, or Crop Marks.

Illustration of Separation Line in Combine

None
Solid
Broken A
Broken B
Crop Marks

Default: [None]

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inch) in width along the separation line.

Copy Order in Combine

You can set the copy order in Combine mode to From Left to Right or From Top to Bottom.

Illustration of Copy Order in Combine

Default: [From Left to Right]

Program / Delete Format

Store a format (background) image for use with Format Overlay. You can store up to four formats. For details about how to program a format, see “Storing a format”.

Margin Adjustment Priority

Specify the default setting for the margin size.

You can set the top and bottom margin size.

Default for “Top”: [0.8 inch]

Default for “Bottom”: [0.8 inch]

The range of adjustment is 0 to 200 mm (0 to 7.9 inches) in 1 mm (0.1 inch) steps.

Partial Copy Size

Specify the default settings of the start position (Y1) and the copy size (Y2).

Default for “Y1”: [0.0 inch]

Default for “Y2”: [8.3 inch]

The size can be set as follows:

Y1: 0 mm to 14790 mm (0.0 to 582.2 inches) in 1 mm (0.1 inch) increments, Y2: 210 mm to 15000 mm (8.3 to 590.5 inches) in 1 mm (0.1 inch) increments

Storing a format