Erase Outside

Use this function to copy the original while erasing outside of a specified area.

Illustration of Erase Outside

You cannot use the bypass tray with this function.

To specify the area you want to erase, you have to define the value of X1, Y1, X2, and Y2 on the original. Measure the area you want to specify before entering the area settings.

Illustration of Erase Outside

X1, X2: 0 1220 mm (0 48.0 inches)

Y1, Y2: 0 1220 mm (0 48.0 inches)

Press [Edit / Stamp].
Press [Erase].
Press [Erase Outside].
Enter the length of [X1] with the number keys, and then press [].
Enter the lengths of [X2], [Y1], and [Y2] in the same way, and then press [OK].
Press [OK].

When using this function with magnification, the actual size will be the specified value multiplied by the reproduction ratio.
To change the value you entered, press the key you want to change, and then enter a new value.