Specifying standard size paper for the bypass tray
This describes how to load standard size paper onto the bypass tray.
Set the paper size using the control panel. Press the [Menu] key.
Press the [
] or [
] key to select [Paper Input], and then press the [OK] key.
Press the [ ] or [ ] key to select [Paper Size:Bypass Tray], and then press the [OK] key.
Press the [ ] or [ ] key to select the paper size you want to use, and then press the [OK] key.
Press the [Menu] key to return to the initial screen.
After loading paper on the tray, specify the paper type using the control panel and printer driver.
The number of pages that can be loaded on the bypass tray differs depending on paper type. Make sure paper is not stacked above the paper guides inside the bypass tray.
