Skip header
 

Top Page > Hardware Guide > Paper and Other Media > Supported Paper for Each Tray > Bypass Tray

Bypass Tray

Paper sizes requiring manual setting

The following sizes are supported, but they must be selected using the control panel. For details about paper size settings, see "Specifying standard size paper for the bypass tray".

The custom size must be selected using the control panel or the printer driver. For details about setting the paper size on the control panel, see "Specifying custom size paper for the bypass tray".

For details about setting on the printer driver, see the printer driver Help.

Paper sizes

A4Portrait, B5 JISPortrait, A5Portrait, B6 JISPortrait, A6Portrait, 8 1/2 " multiplication 14 " (Legal)Portrait, 8 1/2 " multiplication 13 " (Foolscap)Portrait, 81/2 " multiplication 11 " (Letter)Portrait, 8 1/4 " multiplication 13 " (Folio)Portrait, 8 " multiplication 13 " (F/GL)Portrait, 7 1/4 " multiplication 10 1/2 " (Executive)Portrait,

5 1/2 " multiplication 8 1/2 " (Half Letter)Portrait, 4 1/8 " multiplication 9 1/2 " (Com10)Portrait, 3 7/8 " multiplication 7 1/2 " (Monarch)Portrait, C5 Env.Portrait, C6 Env.Portrait, DL Env.Portrait, 16KPortrait

Bypass Tray supports custom size paper, approximately 70 - 216 mm (2.76 - 8.5 inches) in width, and 127 - 1260 mm (5 - 49.6 inches) in length. Set as custom size using the printer driver.

The supported size may differ depending on the printer language you use.

Reference