Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N/GX e7700N
ContentsPreviousNextHelp

No Paper/Paper Jam/Tray Not Detected (Bypass Tray)

The Bypass Tray is empty, paper jams are detected on the Bypass Tray, or the multi bypass tray is not installed properly. Follow the procedure below to resolve these problems.

No Paper

  • Loading paper (Press the [Form Feed] key).

  • Cancel the print job.

Paper Jam

  • Remove jammed paper. See "Removing Paper Jammed in the Bypass Tray".

Tray Not Detected

  • Attach the multi bypass tray properly. See "Attaching and Detaching the Multi Bypass Tray BY1000" or "Attaching and Detaching the Multi Bypass Tray BY1020".

Reference

Related topics

Loading Paper
Canceling the Print Job