



	Contents Previous Next

Top Page > Preparing for Printing > Setting Up the Hardware > Installing the Print Cartridges

Installing the Print Cartridges

Keep ink and ink containers out of reach of children.

If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if necessary.

If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

When removing jammed paper or replacing ink, avoid getting ink on your clothing. If ink comes into contact with your clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and make removing the stain impossible.

When removing jammed paper or replacing ink, avoid getting ink on your skin. If ink comes into contact with your skin, wash the affected area thoroughly with soap and water.

Do not turn the machine on until you have read how to do so.
Be sure to install the unused print cartridge that is supplied. Installing any other cartridge could result in incomplete ink filling and malfunction.

Remove the packaging from the print cartridges.
Do not touch the ink supply ports or silicon substrates of print cartridges.
While pressing the recessed area () of the right front cover, open the cover ().
Check the orientation of each cartridge, and then install them gently.
Install in the following order from the left: black, cyan, magenta, and yellow.
Push in each cartridge.
Repeat steps 3 to 4 for all four cartridges.
Close the right front cover.