Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N/GX e7700N
ContentsPreviousNextHelp

Top Page > Preparing for Printing > Setting Up the Hardware > Checking the Supplied Items and Unpacking the Printer

Checking the Supplied Items and Unpacking the Printer

WARNING

  • Keep the polythene materials (bags, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.

CAUTION

  • The machine weighs around 13.6 kg (30.0 lb) (GX e2600).

  • The machine weighs around 14.0 kg (30.9 lb) (GX e3300N/GX e3350N).

  • The machine weighs around 19.1 kg (42.1 lb) (GX e7700N).

  • Grip the center area at the base of the printer's sides. Lift it slowly and do not strain your body.

  • When moving the printer, remove the option. Careless handling and over exertion when lifting can result in breakage and/or injury.

CAUTION

  • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

CAUTION

  • Before installing or removing options, always disconnect the power cord plugs from the wall outlet and allow time for the main unit to fully cool. Failing to take these precautions could result in burns.

Important

Open the box and take out all supplied items. Check that all the following items are present:

  1. Take off the protective covering.

  2. Remove the plastic bag.

  3. Lift the printer and move it to the place where you want to install it.

    Grip the indented area at the base of the printer's sides, as shown. Lift and carry the printer slowly and carefully.

    moving the printer illustration

  4. Remove the tape from the printer body.

    For details about installing options, see "Options".

Note

Reference

TopPreviousNext
Copyright (C) 2008-2011