ManualsContentsPreviousNext |
This section explains the settings on the [Network Security] tab under [Administrator Configuration: Printer Settings].
Using this tab, you can select whether the IPv4 and IPv6 ports for each protocol are open (active) or closed (inactive).
To change the settings in this menu, you must enter the password for printer settings.
DIPRINT
IPv4 / IPv6
The default setting is Active.
LPR / LPD
IPv4 / IPv6
The default setting is Active.
HTTP
IPv4 / IPv6
The default setting is Active.
IPP
IPv4 / IPv6
The default setting is Inactive.
IPP (Port 631)
IPv4 / IPv6
The default setting is Inactive.
SSL / TLS (Port 443)
IPv4 / IPv6
The default setting is Active.
AppleTalk
The default setting is Active.
SNMP Public Write
The default setting is Inactive.
SNMP
IPv4 / IPv6
The default setting is Active.