IEEE 802.1X

The following settings are available under [IEEE 802.1X] on the [Interface Settings] tab.

The changes made on this tab become effective when you change the screen.

The IEEE 802.1X authentication function is not available for a print network.

Although the settings for IEEE 802.1X are displayed on the operation panel and Web Interface, they cannot be configured. On the printed list of settings, the settings for IEEE 802.1X will always be shown as [Inactive].

EAP-TLS

Select whether to enable or disable EAP-TLS.

The default setting is Inactive (disabled).

EAP-TTLS (PAP)

Select whether to activate or inactivate EAP-TTLS (PAP).

The default setting is Inactive (disabled).

PEAP (MSCHAPv2)

Select whether to activate or inactivate PEAP (MSCHAPv2).

The default setting is Inactive (disabled).

LEAP

Select whether to enable or disable LEAP.

The default setting is Inactive (disabled).

User Name

Enter a user the name for the IEEE 802.1X wired connection.

Password

Enter a password for the IEEE 802.1X wired connection.