Applying/Reconfiguring a Tray Paper Setting

Use the following procedure to change or recall a registered Tray Paper Setting.

If the printer settings are password-protected and Menu Protect is enabled, you must enter the password for printer settings to configure these settings.

Press the [Printer] key to display the normal screen.
Press [Recall / Change Tray Paper Settings].
If a message prompting you to enter a password appears, enter the password for printer settings, and then press [OK].
Select the tray whose Tray Paper Setting you want to reconfigure or apply.
Select the registration number of the Tray Paper Setting that you want to apply or reconfigure.
To apply settings registered under a specified registration number to a selected tray, proceed to Step 9.
To reconfigure settings registered under a specified registration number, proceed to Step 6.
Press [Change Paper Settings].
Change the relevant setting(s).
Press [OK].
Press [OK].
The screen returns to the initial display.