Mixed Sizes Mode

When placing different size originals of the same width in the ADF together, the machine automatically checks the size of the originals and makes copies.

When placing originals of different sizes in the ADF and making copies without using the Mixed Sizes mode, paper might become jammed or parts of the original image might not be copied.

The sizes of the originals that can be placed in this mode are as follows:

Metric version

A3 and A4, B4 JIS and B5 JIS, A4 and A5

Inch version

11 × 17 and 8¹/₂ × 11, 8¹/₂ × 11 and 5¹/₂ × 8¹/₂

You can place originals of two different sizes at a time.

Press [Mixed Sizes].
Align the rear and left edges of the originals as shown in the illustration.
1. Place the originals into the ADF
2. Vertical size
Adjust the document guides to the original size.
Place originals in the ADF.
Press the [Start] key.

Since small originals may not be correctly aligned with the original guide, the copy image may be slanted.
Copying speed and scanning speed will be reduced.
The weight range for originals in the Mixed Sizes mode is 52 - 82 g/m² (13.8 - 21.5 lb. Bond).
When using this function with 1 Sided 2 Sided mode, always ensure that the originals of each size are in even numbers. If you have an odd number of originals, insert blank sheets to adjust the total.
If [Mixed Sizes] is not displayed on the screen, set [Mixed Sizes] under Special Original Display Defaults in User Tools. See "General Features".

General Features