General Features

You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or modes are cleared.

The default setting for "Photo" is Off.

The default setting for "Non-photo" is On.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

The paper size, orientation, and paper type currently set in common on the main and sub-machines are selected automatically.

You can specify which original photo type has priority when you select "Text / Photo" or "Photo".

The default setting for "Text / Photo" is Printed Photo.

The default setting for "Photo" is Printed Photo.

The paper size, orientation, and paper type currently set in common on the main and sub-machines are selected automatically.

You can set the original orientation when making two-sided copies.

The default setting is Top to Top.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set the copy orientation when making two-sided copies.

The default setting is Top to Top.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set whether to reset the mode to the initial state or return to the mode in use before the reserved operation was started, when you return to the initial screen after reserved copying finishes.

The default setting is Reset.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set the time required until the display is switched to the reserved first job display after reservation is set.

If you select "Yes", use the numbers keys to enter the time (10-99 seconds).

The default setting is 15 seconds.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

The maximum copy quantity can be set between 1 and 9999.

The default setting is 9999 sheet(s).

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set whether to enable the document counter reset key.

The default setting is Off.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.

The default setting is With Image Rotation.

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size and in the same orientation, copying is interrupted and the message "Load paper." is displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is displayed.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set whether "Dark Background" can be selected as an original type.

The default setting is Off.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set which items will appear as the function keys on the basic display.

The default setting is Off.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set the items to be preferentially displayed as the function keys on the basic display.

The default setting is Off.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can choose to have the available paper trays and sizes shown on the initial display.

The default setting is Display.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can have the original types shown on the initial display.

The default setting is Display.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set whether to show the original types on the initial display.

The default setting is Off.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set up to three items for displaying on the initial display from five items below.

• Mixed Sizes

• Batch

• SADF

• Thin Paper

• Original Size

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set whether to use a buzzer to alert you when you forget to remove an original.

The default setting is On.

If the "Panel key sound" during system settings is set to "Off", this function is invalidated even if it is set to "On".

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

You can set whether to generate a buzzer sound ("pi") when a copy is completed.

If "Panel key sound" when performing system settings is set to "On", the buzzer sounds four times if copying is interrupted because the paper has run out or become jammed. This notifies you that the copy job could not be completed.

The default setting is On.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

When [On] is selected, only the main machine beeper sounds.

You can set whether to display [Connect Copy]. If you select "Off", the key does not appear and a master unit cannot be obtained.

The default setting is On.

You can set whether to count the two-sided documents by number of sheets or pages.

The default setting is Original Sheet Counter.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can assign up to four frequently-used functions to Copy Function keys.

• Off

• Mixed Sizes

• Batch

• SADF

• Thin Paper

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can assign up to four frequently-used functions for scanning documents on the Document Server Storage keys.

• Off

• Mixed Sizes

• Batch

• SADF

• Thin Paper

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.