Cover Open
A cover is open. Make sure all covers are fully closed.
If the cover is already closed, open and then reclose it.
Follow the procedure below to close the cover.
Close the cover.
Top cover
Left cover
Duplex unit cover
If the bypass tray is attached to the printer, switch the printer off and detach the bypass tray.
Check that the duplex unit is correctly attached and the duplex unit cover is closed.
The GX e2600 is not equipped with a duplex unit.
Rear Cover
Only the GX e2600 has a rear cover.
There is a guide board in the recess behind the duplex unit. If the guide board is open, close it.
