Detaching and Reattaching the Multi Bypass Tray
To clear a paper jam, you might have to detach the bypass tray.
This section explains how to detach and reattach the bypass tray.
Remove any paper in the bypass tray.
Push the bypass tray extension in.
Detach the bypass tray.
Reattach the bypass tray.
Pull the bypass tray extension out.
Load paper in the bypass tray.
After attaching the paper feed unit, you must register where to start printing on paper loaded in the paper feed unit.
When you attach the bypass tray, take care not to trap the USB cable.
When you detach and reattach the bypass tray, switch the printer off.
For details about registering where to start printing on paper loaded in the paper feed unit, see Registration
.
