Placing originals

To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made on the control panel must match.

Place originals correctly by referring to the following table:

Exposure Glass

Turn the original over, and then place it face down on the exposure glass.

Original orientation and control panel key selection
Original orientation	Control panel key
top edge touches top left corner of exposure glass
top edge touches rear of exposure glass

ARDF

Hold the original so that its text is in the natural readable orientation, and then place it face up in the ARDF.

Original orientation and control panel key selection
Original orientation	Control panel key
top edge placed first
top edge touches rear of ARDF