Skip header
 

Top Page > Hardware Guide > Paper and Other Media > Loading Paper > Loading Paper in the Bypass Tray > Specifying custom size paper for the bypass tray

Specifying custom size paper for the bypass tray

Important

  • When loading custom size or special paper, specify the paper size using the control panel or printer driver.

  • The custom paper size selected using the printer driver overrides that selected using the control panel. Do not configure the settings using the control panel if you have already made the settings using the printer driver.

  • You cannot print on custom size paper with an application that does not support the custom size setting.

  • Paper sizes between 90 - 216 mm (3.54 - 8.5 inch) in width and 148 - 900 mm (5.83 - 35.4 inch) in length can be loaded in the bypass tray.

1Press the [Menu] key.

image

2Press the [Down arrow key] or [Up arrow key] key to display [Paper Input], and then press the [#Enter] key.

Menu:           
Paper Input     

3Press the [Down arrow key] or [Up arrow key] key to display [Paper Size], and then press the [#Enter] key.

Paper Input:    
Paper Size      

4Press the [Down arrow key] or [Up arrow key] key to display [Bypass Tray], and then press the [#Enter] key.

Paper Size:     
Bypass Tray     

5Press the [Down arrow key] or [Up arrow key] key to display [Custom Size], and then press the [#Enter] key.

Bypass Size:    
Custom Size     

6Press the [Down arrow key] or [Up arrow key] key to select a unit, and then press the [#Enter] key.

Custom Size:    
mm              

7Press the [Down arrow key] or [Up arrow key] key to enter the horizontal value, and then press the [#Enter] key.

Custom Size:    
Horiz. 216.0 mm 

8Press the [Down arrow key] or [Up arrow key] key to enter the vertical value, and then press the [#Enter] key.

Custom Size:    
Vert. 356.0 mm  

9Press the [Menu] key.

The initial screen appears.

Reference

  • For details about the printer driver, see the printer driver Help.