Specifying Settings on the Control Panel

Make the following network settings according to the network interface you are using.

If you have connected the printer to a network, make the required network environment settings.

The following table shows the control panel settings and their default values. These items appear in the [Network Setup] menu.

The following example explains making settings for TCP/IP.

Press the [Power] key.
Press the [Menu] key.
The Menu screen appears on the display.
Press the [] or [] key to display the [Host Interface] menu, and then press the [#Enter] key.

Menu: Host Interface
Press the [] or [] key to display [Network Setup], and then press the [#Enter] key.

Host Interface: Network Setup
Press the [] or [] key to select [IP Address], and then press [#Enter] key.

Network Setup IP Address

The current IP address appears on the display.
Press the [] or [] key to enter the left most entry field of the IP address, and then press the [#Enter] key.

IP Address: . 0. 0. 0

To get an IP address for the printer, contact your network administrator.
The value moves by 10 if the [] or [] key is kept pressed.
When the [#Enter] key is pressed, the cursor moves to the next field.
Press the [#Enter] key.
As the specified value is entered in each field, the cursor moves to the next field.

IP Address: 192. . 0. 0
Repeating the steps, specify values in all fields, and then press the [#Enter] key.
To return to the previous field, press the [Escape] key.
Specify “Subnet Mask” and “Gateway Address” in the same way as when specifying the IP address.
After you have made all the settings, press the [Online] key.
The specified settings are set and the initial printer screen reappears.
You can print the configuration page to confirm the specified settings.

For details about how to print a configuration page, see Printing a Configuration Page.