Skip header
For screen readerStandard Web browser page
 

Top Page > Preparing for Printing > Setting Up the Hardware > Loading Paper > Loading Paper into Tray 2

Loading Paper into Tray 2

Follow the procedure below to load paper into tray 2.

You can load plain paper and inkjet plain paper in tray 2.

A4/Letter size paper is loaded here.

Important

  • Load A4/Letter size paper in Portrait orientation.

  1. Hold the Tray 2 grip, pull the tray halfway out, lift it slightly (image), and then pull it out further (image).

    image

    Pull tray 2 completely out. Take care not to drop it.

  2. Lift off the tray 2 cover.

    image

    Do not place the paper tray cover on top of the printer.

  3. While squeezing the catch on the paper guide, slide the guide so it is positioned according to the paper size.

    image

    Beforehand, make sure to squeeze the front end paper guide, and then expand the guide.

  4. Load paper with the print side face down but not over the limit mark.

    image

  5. Re-attach the tray 2 cover.

    image

  6. Push tray 2 gently in until it stops.

    image