Skip headerimageimage
ContentsPreviousNextHelp

Replacing a print cartridge

Follow the procedure below to replace an empty print cartridge.

Clear any errors, such as when there is a paper jam or when no paper is loaded, before replacing a print cartridge.

CAUTION


  • If ink comes into contact with your eyes, rinse immediately in running water. For other symptoms, consult a doctor.


  • If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.


  • If your skin comes into contact with ink, wash the affected area thoroughly with water or soap and water.


  • Keep the ink or ink container out of reach of children.

Important

  1. Remove the print cartridges' packaging.

    If multiple cartridges are empty, replace all the empty cartridges. You can shorten the time for needed replacement.

  2. Open the right front cover.

    detail illustration

  3. Take out the empty cartridges.

    detail illustration

  4. Check the cartridges' orientation, and then install them gently.

    Install in the following order from the left: black, cyan, magenta, and yellow.

  5. Push in the cartridge using the PUSH area.

    detail illustration

  6. Close the right front cover.

    detail illustration

Reference