Scanning Originals Into a Client Computer via TWAIN Driver

Use the following procedure to configure the machine for use as a scanner, so users can scan originals into a client computer via the TWAIN driver.

Use a USB cable to connect the machine to a computer, or connect the machine to the network.
Install the TWAIN driver and any other necessary drivers on the computer.
If you are using the TWAIN driver via network connection, make the necessary network settings, such as the machine's IP address.
Begin using the scanner.

For details about procedures and settings in step 1, see “Before installing the Printer Driver (USB)”, “Installing the Printer Driver (Network Interface Board)”, Quick Installation Guide
For details about procedures and settings in step 2, see Confirming the Connection Method, “Quick Install for USB”, “Quick Install for Network”, Quick Installation Guide, Installing the Drivers for Local Connection, Installing the Drivers for Network Connection.
For details about procedures and settings in step 3, see Network Settings.
For details about procedures and settings in step 4, see Using the TWAIN Scanner.