If You Have Problems Using the Copier Function
This section explains causes and remedies when copy results are not as expected.
A text pattern appears in the background of the copy.
You have copied a copy-guarded document protected from unauthorized copying.
Check the document. See Unauthorized Copy Control
.
Copies are not in correct order.
You placed the originals in the incorrect order.
To copy a multi-page original using the ADF, make sure the first page is topmost, and then make the following settings under [Copier Features]: set [EjctPrt FaceDwn] to [On], or [Output order] to [Last to 1st].
When printing multiple pages on one sheet, the copies are not printed in the specified order.
If the copies are not printed in the specified order when printing multiple pages on one sheet, change the [2sd Org.Bind] and [2sd Org.Orient] settings in [Copier Features].
Printing multiple pages on one sheet with [2sd Org.Bind] set to [Top to Top] and [2sd Org.Orient] set to [Portrait]
Printing multiple pages on one sheet with [2sd Org.Bind] set to [Top to Top] and [2sd Org.Orient] set to [Landscape]
Copies are blank.
The original is not set correctly.
When using the exposure glass, face the originals down. When using the ADF, face them up. See, Setting and Placing Originals.
