Resetting the Replaceable Parts Counter

Pull out the drawer until it stops.

Turn the machine on.

Access the Adjustment Settings for Skilled Operators menu.

Displaying the [Adjustment Settings for Skilled Operators] Button

Press [Machine: Maintenance].

Press [Reset Replaceable Parts Counter].

Press the button of the part that has been replaced.

Press [] to enter the value "1", and then press [Clear].

Press [OK].

Turn the machine off.

Turning Off/On the Power

Push the drawer back into the machine.

Turn the machine on.

The counter for the replaced component is reset. The setting for adjusting the machine for the replaced component is executed automatically.

Access the Adjustment Settings for Skilled Operators menu.

Displaying the [Adjustment Settings for Skilled Operators] Button

Press [Machine: Maintenance].

Press [Replaceable Parts Counter].

Make sure the counter has been reset.