Turning Off/On the Power
Turn off the main power before carrying out any of the operations described in this manual.
When you push the main power switch, wait at least 10 seconds after it is confirmed that the main power indicator has lit up or gone out.
The main power switch is on the left side of the machine. When this switch is turned on, the main power turns on and the main power indicator lights up. When this switch is turned off, the main power turns off and the main power indicator goes out.
Turning Off the Main Power
- When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.
Do not turn off the power while the machine is in operation.
Do not hold down the main power switch while turning off the main power. Doing so forcibly turns off the machine's power and may damage the hard disk or memory and cause malfunctions.
Open the main power switch cover, and then push the main power switch.
The main power indicator goes out.
The fan inside the machine near the vents may continue running to cool the machine after a large print job. While the fan is running, do not turn off the main power nor disconnect the power cord from the wall outlet.
Turning On the Main Power
Make sure the power cord is firmly plugged into the wall outlet.
Open the main power switch cover, and push the main power switch.
The main power indicator lights up.
After you switch the main power on, a screen may appear to indicate that the machine is initializing. Do not switch the power off during this process. Initialization takes about three minutes.