Using the Fiery Settings Hub
Press [
] on the navigation bar to display the Fiery Settings hub.
The Fiery Settings hub displays the setting items of the Fiery controller that is connected to the machine. On the hub, the frequently used print settings appear directly, allowing you to change the settings of a job without having you connect remotely to the DFE.
Each setting item is grouped by category in the menu tree on the left side of the screen. First, select a category of the setting you want to change, and then make changes to each item in the setting.
Categories of Setting Items
The menu tree in the left part of the screen shows various information of the Fiery controller including its system information, network settings, frequently used print settings, and other setting items.
Fiery
Shows the server name, version and other system information, and IP address of the Fiery controller. You can also shutdown, restart, and initialize the Fiery controller, or erase the job logs.
For details, see the followings:
Setup
Shows the system settings of the Fiery controller. To obtain information from the Fiery controller, change the network, security, and other settings to match the environment where you use the Fiery controller.
For details, see the followings:
Other Setting Categories
Shows the items in the print settings of the Fiery controller.
The Items that appear vary depending on your environment.
Details of Setting Items
The detailed information of a setting item appears when you press a category name in the menu tree in the left part of the screen,
To apply the change you made on a setting, restart the Fiery controller. The restart button continues to appear in the upper right corner of the screen even after you navigate to a different item category if you change even one of the settings.
When you make any changes to the settings, always restart the Fiery controller before initiating a print process.