Pressing an OK Stamp on Pages of the Scanned Original

You can apply a circular stamp (OK stamp) on the scanned pages when using the auto reverse document feeder (ARDF). The stamp indicates that the page has been scanned.

• The stamp will be applied near the bottom edge of the scanned side.

• When both sides of the original are scanned, the stamp is applied near the bottom edge on both sides.

1. Press [Scanner] on the Home screen.
   

2. Place an original in the ARDF.
   Placing an Original to Scan

3. Press [Send Settings] on the scanner screen and select the [Stamp] check box.
   

4. Specify the scan settings according to the purpose of the scanned data.
   Scanning an Original with Suitable Quality and Density
   Specifying the File Type or File Name When Scanning a Document

5. To send the scanned document to an e-mail address, press [Sender] and then specify the sender.
   When a logged in user is operating the machine, the logged in user becomes the sender.
   Scanning Documents and Sending the Scanned Data by E-mail

6. Specify the destination, and press [Start].