Copying a Separately Scanned Original as a Single Document
You can scan originals separately from the ADF, and combine and copy them as a single document. You can make copies more efficiently using this function together with the Sort or Combine function.
-
This function is available when the ADF is installed to the machine.
Copy Function
When copying an original comprised of too many pages to place in the ADF, specify [Batch] and then scan the original in batches.
For the maximum number of sheets you can load in the ADF, see the following section:
Specifications for One-pass Duplex Scanning ADF
Specifications for Auto Reverse Document Feeder (ARDF)
-
Place special originals, such as translucent paper, one by one.
-
Press [Copy] on the Home screen.
-
Press [Batch] on the Copy screen.
If the key is not displayed, select it from [Original Setting/Store File]. -
Specify 2 sided, Combine, or Sort as necessary.
Duplex Copying
Combining and Copying a Multi-page Original onto a Single Sheet of Paper
Copying in Page Order or for Each Page Number -
Place the original in the ADF.
Basic Procedure for Copying Documents -
Press [Start].
When scanning the originals set in the ADF is completed, proceed to the next step. -
Place the next original, and then press [Start].
-
Repeat Step 6 until all of the originals are scanned.
-
When specifying 2 sided, Combine, or Sort, press [Finish Scn] after scanning all of the originals.
-
To copy multiple sheets by checking the finished pages individually or to place a thick original with multiple sheets in the ADF page by page, specify [SADF]. The second and subsequent pages will be copied with the same settings by simply placing the next original.
-
Set [Switch to Batch] to [SADF] in [Settings]
[Copier / Document Server Settings] [Scan] [Batch/SADF] in advance. When you specify [SADF], you cannot use [Batch].
-
Press [Copy] on the Home screen.
-
Press [SADF] on the Copy screen.
If the key is not found, select it from [Original Setting/Store File]. -
Specify 2 sided, Combine, or Sort as necessary.
Duplex Copying
Combining and Copying a Multi-page Original onto a Single Sheet of Paper
Copying in Page Order or for Each Page Number -
Place the first page of the original in the ADF.
Basic Procedure for Copying Documents -
Press [Start].
-
Place the next page while a message prompting you to place the next original appears on the screen.
-
The second and subsequent pages will be fed automatically without pressing [Start].
-
When specifying 2 sided, Combine, or Sort, press [Finish Scn] after scanning all of the originals.
-
-
In the factory default setting, the original is not fed automatically if five seconds has passed after placing the previous original. You can change this value in [SADF Auto Reset].
Batch/SADF