Paper/Paper Input

Paper Display

You can specify whether to display or hide the Paper Type keys on the document print screen of the Document Server screen. The display shown below is an example when the setting is changed from [Display] to [Hide].

Auto Tray Switching

When paper of the same size and type is loaded in two or more trays, the machine automatically shifts to the other tray when the first tray runs out of paper (Auto Tray Switching).

Display Bypass Tray Paper Settings

You can specify whether to display the Paper Setting screen for the bypass tray when you select the bypass tray in [Paper Size/Paper Type].

Display Paper Settings for Bypass Tray

You can specify whether to display the Paper Selection screen for the bypass tray when you load paper into the bypass tray.

Bypass Tray Paper Misfeed Prevention

You can specify how the machine responds when the paper size selected on the control panel differs from that loaded on the bypass tray.

If you specify [On], the machine will display a message after copying the first page of the originals. Load the correct size of paper on the bypass tray, and then press [Start] to copy from the first page of the originals.

Letterhead Setting

You can specify whether to use letterhead paper.

When you specify [Yes], the paper is not rotated to prevent copying onto the letterhead paper in an incorrect orientation.