User GuideIM 550/600 series

Selecting the Network Connection Method

Connect the machine to a network to use the functions of the machine from your computer or mobile device. There are two methods to operate the network function on the machine.

  • Connecting the machine to a Local Area Network (LAN)

  • Connecting to the machine directly from a computer or mobile device

Connecting the machine to a Local Area Network (LAN)

Connect the machine to a network for using the functions of the machine such as printing from the computer or sending scanned data by e-mail via the network.

illustration of a local area network

There are two methods for a network connection: wired connection with a hub or router using a LAN cable, and wireless connection to an access point via wireless LAN.

Using a wireless connection

Connect to an access point in Infrastructure mode.

illustration of a wireless connection

Connecting to a Wireless LAN

Optional wireless LAN board is required.

Connecting to the machine directly from a computer or mobile device

You cannot connect a device to the machine directly without routing through an access point to perform printing or scanning. There are three available methods.

Connecting from multiple devices (Direct Connection: Group Owner Mode)

The mobile devices detect the machine as the access point.

  • You can connect to up to four smart devices simultaneously on the network of Smart Operation Panel.

  • You can connect to up to nine smart devices on the network of the optional wireless LAN board.

illustration of a direct connection

Connecting to the Machine from a Mobile Device Using the Wi-Fi Direct Function

  • You can connect devices that do not support Wi-Fi Direct.

  • You cannot connect the devices to each other.

  • You can use the wired LAN network connection in combination with this method.

Connecting from a single device (Direct Connection Mode)

This connects one mobile device to the machine.

illustration of a direct connection

Connecting to the Machine from a Mobile Device Using the Wi-Fi Direct Function

  • You can connect devices that support Wi-Fi Direct.

  • You can use the wired LAN network connection in combination with this method.

Connecting from a computer (Ad-hoc Mode)

This connects one computer to the machine.

illustration of a direct connection

Connecting to a Wireless LAN

  • Optional wireless LAN board is required.

  • You cannot use the wired LAN network connection in combination with this method.

Note