User GuideIM 550/600 series

Copying a Separately Scanned Original as a Single Document

You can scan originals separately from the ADF, and combine and copy them as a single document. You can make copies more efficiently using this function together with the Sort or Combine function.

Dividing and Copying an Original with Many Pages in Several Parts

When copying an original comprised of too many pages to place in the ADF, specify [Batch] and then scan the original in batches.

For the maximum number of sheets you can load in the ADF, see the following section:

List of Specifications

1Press [Copy] on the Home screen.

Operation panel screen illustration

2Press [Batch] on the Copy screen.

Operation panel screen illustration

[Batch] is not displayed in the default setting. Change the setting in the following setting items to display the key.

4Place the original in the ADF.

Placing an Original on the Scanner

5Press [Start].

When scanning the originals set in the ADF is completed, proceed to the next step.

6Place the next original, and then press [Start].

  • Repeat Step 6 until all of the originals are scanned.

  • When specifying 2 sided, Combine, or Sort, press [Finish Scn] after scanning all of the originals.

Copying an Original by Placing Page by Page

To copy multiple sheets by checking the finished pages individually or to place a thick original with multiple sheets in the ADF page by page, specify [SADF]. The second and subsequent pages will be copied with the same settings by simply placing the next original.

Important

  • Set [Switch to Batch] to [SADF] in the setting items shown below.

    • Settings screen type: Standard

      [Copier / Document Server Settings][Scan][Batch/SADF]

    • Settings screen type: Classic

      [Copier / Document Server Settings] the [Input / Output] tab

1Press [Copy] on the Home screen.

Operation panel screen illustration

2Press [SADF] on the Copy screen.

Operation panel screen illustration

[SADF] is not displayed in the default setting. First, display [Batch] by changing the setting in the following setting items, and then set [Switch to Batch] to [SADF].

4Place the first page of the original in the ADF.

Placing an Original on the Scanner

5Press [Start].

6When a message "Set the additional originals." is displayed, place the next page.

  • The second and subsequent pages will be fed automatically without pressing [Start].

  • When specifying 2 sided, Combine, or Sort, press [Finish Scn] after scanning all of the originals.

Note

  • In the factory default setting, the original is not fed automatically if five seconds has passed after placing the previous original. You can change this value in [SADF Auto Reset].