Previous
< Paper with a width of 191–261 mm (7.6 - 10.4 inches) is being used >
Load the sheets the other way up.
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
To follow the steps below, attach the decurler unit.
In the [Main Unit: Paper Feed/ Output] group of the [Adjustment Settings for Operators] menu, set 0310: [Correct Output Paper Curl] to [U Curl Correction Level: Off].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0310: [Correct Output Paper Curl] to [U Curl Correction Level: Small].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0310: [Correct Output Paper Curl] to [U Curl Correction Level: Large].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0310: [Correct Output Paper Curl] to [П Curl Correction Level: Small].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0310: [Correct Output Paper Curl] to [П Curl Correction Level: Large].
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Contact your service representative. |
