Previous
Low Temperature
Select one of the three levels of initial print speed reduction at low temperatures.
The selected initial print speed reduction level in copies-per-minute (CPM) is applied only when printing starts (for approximately 15 to 20 seconds).
This helps improve throughput if the fusing temperature can be kept constant. However, the throughput may decrease in an environment in which the temperature varies.
The setting will take effect if the ambient temperature is 17°C (62.6°F) or lower. Since the temperature of the fusing unit may decrease in a cold environment, specify this setting in addition to [Normal/High Temperature].
Normal/High Temperature
Select one of the three levels of initial print speed reduction at normal room temperatures and above.
The selected initial print speed reduction level in copies-per-minute (CPM) is applied only when printing starts (for approximately 15 to 20 seconds).
This helps improve throughput if the fusing temperature can be kept constant. However, the throughput may decrease in an environment in which the temperature varies.
The setting will take effect if the ambient temperature is higher than 17°C (62.6°F).
Setting Item |
Values |
|---|---|
04: Low Temperature/05: Normal/High Temperature |
[Do not Reduce] (Full speed) [Level 1] (80% of full speed) [Level 2] (65% of full speed) [Level 3] (50% of full speed) |
