Adjust the reverse rotation amount of registration roller during Z-folding skew correction when using Finisher SR5110 or Booklet Finisher SR5120.
Use this if the Z-fold skew correction causes problems.
With the initial factory setting of "0.0", the reverse rotation is set to 3 mm.
Press [] to reduce the reverse rotation. With "-3.0", the reverse rotation is reduced to 0 mm.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
[Set] |
0.0 |
0.0 |
-3.0 |
0.5 |
mm |