Paper Misfeed Message (Y1) (Y2) (Y3)

Remove the jammed paper from the optional paper feed unit.

The following messages are displayed according to the tray where the paper is jammed:

"(Y1)": Tray 2
"(Y2)": Tray 3
"(Y3)": Tray 4

The procedure for removing jammed paper is the same for all trays. In the following procedure, a paper jam that occurs in Tray 2 (with the (Y1) message displayed) is explained as an example.

Open the tray 2 rear cover.

Pull out the jammed paper carefully.

If the paper cannot be removed, do not pull it out forcefully. Follow the procedure below to remove the paper.

Close the tray 2 rear cover.

If the error status continues, remove the paper from tray 2 or inside the printer.

For the procedure to remove paper from the tray, see Paper Misfeed Message (A) (E).

For the procedure to remove paper from inside the printer, see Paper Misfeed Message (B) (Z).

Open and then close the tray 2 rear cover.

The error status is canceled when you open and then close the rear cover.