Quality Maintenance
The table below shows the list of setting items. For details about their functions, see Quality Maintenance.
Color Registration | Auto Adjust | |
Manual Color Registration | Normal Mode | MH-L, MH-R, CH-L, CH-R, YH-L, YH-R, MV, CV, YV |
Advanced Mode | MH-1, MH-2, MH-3, MH-4, MH-5, CH-1, CH-2, CH-3, CH-4, CH-5, YH-1, YH-2, YH-3, YH-4, YH-5, MV-3, CV-3, YV-3 | |
Color Calibration | Adjust Auto Density | |
Print Test Pattern 1 | ||
Print Test Pattern 2 | ||
Reset Setting | ||
Registration (1/2) | Print Test Sheet | Tray 1, Tray 2, Tray 3, Tray 4, Bypass Tray, Back Side: Tray 1, Back Side: Tray 2, Back Side: Tray 3, Back Side: Tray 4, Backside: Bypass Tray |
Registration (2/2) | Adjustment | Horizontal: Tray 1, Horizontal: Tray 2, Horizontal: Tray 3, Horizontal: Tray 4, Horizontal: Bypass Tray, Horizontal: Back Side: Tray 1, Horizontal: Back Side: Tray 2, Horizontal: Back Side: Tray 3, Horizontal: Back Side: Tray 4, Horiz: Back Side Bypass Tray, Vertical: Tray 1, Vertical: Tray 2, Vertical: Tray 3, Vertical: Tray 4, Vertical: Bypass Tray |
4 Color Graphic Mode | Text Priority, Photo Priority (default) | |
Drum Refresh | ||
Auto Drum Refresh | Off, Short, Standard (default), Long | |
Altitude Adjustment | Standard(default), High 1, High 2 | |
Charger Output | -50V, -25V, Standard(default), +25V, +50V | |
Clean Photoconductor Unit | ||
High Gloss Print | On, Off (default) | |
Photoconductor Unit Heater | On, Off (default) | |
Clean Laser Scanner Unit |