Pressing an OK Stamp on Pages of the Scanned Original
You can apply a circular stamp (OK stamp) on the scanned pages using the ADF. The stamp indicates that the page has been scanned.
![Illustration of pressing OK stamps](../../scanner/image/dzb929.gif)
The stamp will be applied near the bottom edge of the scanned side.
When both sides of the original are scanned, the stamp is applied near the bottom edge on both sides.
Press [Scanner] on the Home screen.
![Operation panel screen illustration](../../scanner/image/icon_homescreen_en_mts009.gif)
Place an original in the ADF.
Press [Send Settings] on the scanner screen and select the [Stamp] check box.
![Operation panel screen illustration](../../scanner/image/met3fax-en009.gif)
Specify the scan settings according to the purpose of the scanned data.
To send the scanned document to an e-mail address, press [Sender] and then specify the sender.
Specify the destination, and press [Start].
Replace the cartridge when the OK stamps appear faint.