Network Settings

Ethernet

Item	Description	Value
MAC Address	Displays the machine's MAC address.	–
Ethernet Speed	Displays the current Ethernet speed setting.	1000Mbps Duplex 100Mbps Full Duplex 100Mbps Half Duplex 10Mbps Full Duplex 10Mbps Half Duplex Ethernet Unavailable Appears when a network cable is not connected.
Set Ethernet Speed	Specifies the speed for Ethernet communication. For most networks, the default setting is the optimum setting.	Auto Select 1000Mbps Duplex 100Mbps Full Duplex 100Mbps Half Duplex 10Mbps Full Duplex 10Mbps Half Duplex Default: [Auto Select]

Item

Description

Value

MAC Address

Displays the machine's MAC address.

–

Ethernet Speed

Displays the current Ethernet speed setting.

Set Ethernet Speed

Specifies the speed for Ethernet communication.

For most networks, the default setting is the optimum setting.

Default: [Auto Select]

WiFi

Item	Description	Value
WiFi Enable	Select whether to enable or disable Wireless LAN. If [Disable] is set, [WiFi Status], [MAC Address], [Current Connection], [Input SSID], and [WPS] are not displayed.	Disable Enable Default: [Disable]
WiFi Status	Displays the current connection status.	-
MAC Address	Displays the machine's MAC address.	-
Current Connection	Displays detailed information about the connection, such as the SSID and the wireless signal strength.	-
Input SSID	Input the SSID of the machine.	-
WPS	Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Setup Guide.	PBC PIN

IPv4 Configuration

Item	Description	Value
DHCP	Sets the machine to receive its IPv4 address, subnet mask, and default gateway address automatically from a DHCP server.	Inactive Active Default: [Active]
IP Address	Specifies the machine's IPv4 address when DHCP is not used. Use this menu to check the current IP address when DHCP is used.	Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment.
Subnet Mask	Specifies the machine's subnet mask when DHCP is not used. Use this menu to check the current subnet mask when DHCP is used.	Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment.
Gateway Address	Specifies the machine's default gateway address when DHCP is not used. Use this menu to check the current default gateway address when DHCP is used.	Default: XXX.XXX.XXX.XXX The numbers represented by "X" vary according to your network environment.
IP Address Method	Displays the IP address acquisition method.	IP Not Ready DHCP Auto IP Manual Config. Default IP

IPv6 Configuration

Item	Description	Value
IPv6	Select whether to enable or disable IPv6.	Inactive Active Default: [Inactive]
DHCP	Sets the machine to receive its IPv6 address from a DHCP server.	Inactive Active Default: [Active]
IP Address (DHCP)	Displays the IPv6 address obtained from a DHCP server.	–
Manual Config. Address	Specifies the machine's IPv6 settings.	Manual Config. Address Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39 characters. For details about entering characters, see Entering Characters. Prefix Length Specifies the prefix length, using a value between 0 and 128. Gateway Address Specifies the IPv6 address of the default gateway. Can contain up to 39 characters. For details about entering characters, see Entering Characters.
Stateless Address	Displays the IPv6 stateless addresses obtained from a Router Advertisement.	Stateless Address 1 Stateless Address 2 Stateless Address 3 Stateless Address 4
Link-local Address	Displays the IPv6 link local address.	–

Connect Method

Item	Description	Value
Connect Method	Specifies which method to use to connect the machine to a network.	Ethernet WiFi Default: [Ethernet]

Contact your network administrator for information about the network configuration.