Specifying Resolution
This section describes how to specify the scan resolution for the current job.
There are six resolution settings. The higher the resolution, the higher the quality but greater the file size.
Press the [Scanner] key.
Press the selection key under [Addr].
Select [Search By Name] or [Search By ID].
Select the address to which you want to send the scanned document.
Press the selection key under [Setting].
Press the selection key under [Mode].
Press the [] or [] key to select [Resolution], and then press the [OK] key.
Press the [], [], [], or [] key to select the desired resolution, and then press the [OK] key.
You can change the machine's default [Resolution] setting to always scan with a specific resolution level. For details, see Scan Settings.
Temporary job settings are cleared in the following cases:
When no input is received for the period of time specified in [System Auto Reset Timer] while the initial screen is displayed. For details, see Administrator Tools Settings.
When the [Clear/Stop] key is pressed while the initial screen is displayed.
When the machine's mode is changed.
When the power is turned off.
When the machine's default for the same setting is changed.