DEVICE
This section describes the user tools in [DEVICE] under [Screen Features].
For details on how to access Screen Features, see Accessing Screen Features.
Sound
Volume
Adjust the volume of the sound played on the machine.
Default: [1]
Notification Sound
Specify the sound pattern when the screen is tapped.
Default: [Sound of Beep]
Operation Invalid
Specify the sound pattern when an invalid operation is performed.
Default: [Sound of Beep]
Operation Completed
Specify the sound pattern when an operation is completed.
Default: [Sound of Beep]
Fax Printing Finished
Specify the sound pattern when a fax printing is completed.
Default: [Sound of Beep]
Fax Transmission Finished
Specify the sound pattern when a fax transmission is completed.
Default: [Sound of Beep]
Fax Reception Finished
Specify the sound pattern when a fax reception is completed.
Default: [Sound of Beep]
Login
Specify the sound pattern when a login is performed.
Default: [Sound of Beep]
Logout
Specify the sound pattern when a logout is performed.
Default: [Sound of Beep]
Warm-up
Specify the sound pattern when the machine is ready to be used.
Default: [Sound of Beep]
Auto Reset
Specify the sound pattern when no operation has been performed for a certain period.
Default: [Sound of Beep]
Sound of Less Urgent Level
Specify the sound pattern when the paper tray runs out of paper.
Default: [Sound of Beep]
Sound of Urgent Level
Specify the sound pattern when an operation is suspended.
Default: [Sound of Beep]
Blank Page Detected
Specify the sound pattern when the scanned document is blank.
Default: [Sound of Beep]
Display
Brightness
Brightness
Adjust the brightness of the screen when operating the control panel.
Auto Dim Screen if it is Not Used For a While
Specify whether or not to darken the screen when no operation has been performed for one minute.
Storage
INTERNAL STORAGE
Total space
You can check the capacity of the internal storage on the control panel.
Available
You can check the available space in the internal storage on the control panel.
SD CARD
Total space
You can check the capacity of an SD card inserted into the control panel.
Available
You can check the available space on an SD card inserted into the control panel.
USB STORAGE
Total space
You can check the capacity of a USB memory inserted into the control panel.
Available
You can check the available space on a USB memory inserted into the control panel.