User GuideIM 350/430 series

Creating and Installing a Device Certificate from the Control Panel (Self-Signed Certificate)

Create and install the device certificate using control panel.

This section explains the use of a self-signed certificate as the device certificate.

1Log in as the network administrator from the control panel.

For details on how to log in, see Administrator Login Method.

2Press [System Settings].

3Press [Administrator Tools].

4Press [Down arrow keyNext] 4 times.

5Press [Program / Delete Device Certificate].

Operation panel screen illustration

6Check that [Program] is selected.

Operation panel screen illustration

By selecting [Delete], you can delete the device certificate from the machine.

7Press [Certificate 1].

Only [Certificate 1] can be created from the control panel.

8Configure the necessary settings.

To use the device certificate for S/MIME, PDF Digital Signature, or PDF/A Digital Signature, enter the machine administrator’s e-mail address in the e-mail address setting.

9Press [OK].

"Installed" appears under "Certificate Status" to show that a device certificate for the machine has been installed.

10Log out.

For details about logging out, see Administrator Logout Method.

Note

  • To use the device certificate created on the machine for S/MIME or PDF/A Digital Signature, set "Certification" in Web Image Monitor controlled from networked computers to [Certificate 1]. (Web Image Monitor is a management tool installed on this machine to monitor this machine or configure settings for this machine by using a web browser.)