User GuideIM 350/430 series

PS Menu

Job Timeout

You can specify how long the printer waits (in seconds) before canceling the current job when the job is interrupted while being processed.

Default: [Use Driver / Command]

If you select [Use Machine Setting(s)], enter a value between 0 and 999.

Wait Timeout

You can specify how long the printer waits (in seconds) before it cancels receiving the job when the printer cannot detect the end of the job.

Default: [Use Driver / Command]

If you select [Use Machine Setting(s)], enter a value between 0 and 999.

Paper Selection Method

You can specify how the paper tray will be selected by specifying the default value for DeferredMediaSelection in PostScript.

Default: [Select Paper Tray]

  • Auto Select

    The default value for DeferredMediaSelection is "true". The paper tray that matches the paper setting specified in a print job will be selected.

  • Select Paper Tray

    The default value for DeferredMediaSelection is "false". The paper tray will be selected according to the media selection of PostScript Language Reference.

Swtchng. btwn. 1&2 Sided Prt. Func.

Select which side of paper to print on when the PS command is used to perform two-sided printing, and the "setpagedevice" command is entered.

Default: [Active]

  • Active

    Cancels two-sided printing, and prints pages after the "setpagedevice" command has been entered on the front side of paper.

  • Inactive

    Retains two-sided printing, and prints pages after the "setpagedevice" command has been entered on the back side of paper.

Data Format

You can select a data format.

Default: [TBCP]

This setting is not effective when operating the machine with a parallel connection.

When operating the machine with a parallel connection, and also if the binary data is sent from the printer driver, the print job is canceled.

When an Ethernet connection is used, the print job is canceled if:

  • The printer driver data format is TBCP and the data format selected using the control panel is Binary Data.

  • The printer driver data format is binary and the data format selected using the control panel is TBCP.

Resolution

You can set the print resolution in dots per inch.

Default: [600 dpi]

Orientation Auto Detect

Specify whether or not to automatically detect the print data orientation.

Default: [On]

Font Change Confirmation

Specify whether or not to display the confirmation screen when replacing the font type that cannot be printed.

If [Do not Display] is selected, the font type will be replaced without displaying the confirmation screen and printing will continue.

Default: [Display]

Note