Parallel Memory Transmission
This function dials while the original is being scanned.
The standard memory transmission mode stores the original in memory, and then dials the destination. However, the parallel memory transmission mode allows you to confirm the connection status quickly. In addition, this function scans the original faster than the immediate transmission mode. This is useful when you are in a hurry and need to use the original for another purpose.
You can turn this function on or off with the user parameter (switch 07, bit 2) in the Fax Features menu. See Parameter Settings.
The standard memory transmission mode is used instead of the parallel memory transmission mode in the following cases:
When the line is busy and could not be connected to
When you specify the time to send using the send later function
When you store an original using the memory transmission mode while another communication is in progress
When two or more destinations are specified
When an original is placed on the exposure glass, and then sent
When you send documents stored in the Document Server
When the machine has been switched to the Preview mode with [Preview]
The standard memory transmission mode may be used instead of the parallel memory transmission mode depending on the optional equipment installed if there is not enough free memory left.
If [Stop] is pressed, the original jams or memory runs out, the parallel memory transmission mode stops. The communication result report is printed and files are deleted.