List of Menu Items and Parameters
The control panel allows you to specify or change the settings for using the machine. This section provides information about the menu items and their parameters.
Network Property
Displays information about the current network settings.
To change the settings, press the selection key beneath [Change] to display the Host Interface menu.
To view detailed information about the network settings, press the selection key beneath [Det.Info].
Counter
Displays counter information.
To print the counter information list, press the selection key beneath [Print].
Memory Erase Status
You can display the status of remaining data in the memory. For details, see Memory Erase Status.
[Memory Erase Status] appears only when:
The optional hard disk is installed.
[Auto Erase Memory Setting] is set to [On] on the Security Options menu.
Paper Input
Parameter |
---|
Paper Size:Bypass Tray |
Paper Size(*):Tray 1 |
Paper Size(*):Tray 2 |
Paper Size(*):Tray 3 |
Paper Size(*):Tray 4 |
Paper Type:Bypass Tray |
Paper Type:Tray 1 |
Paper Type:Tray 2 |
Paper Type:Tray 3 |
Paper Type:Tray 4 |
Duplex Tray |
Auto Tray Select |
Tray Priority |
Only installed trays appear on the display panel.
Maintenance
Parameter |
---|
Quality Maintenance |
General Settings |
Timer Settings |
HDD Management |
[HDD Management] appears only when the optional hard disk is installed.
List/Test Print
Parameter |
---|
Multiple Lists |
Config. Page |
Error Log |
Network Summary |
Supply Info List |
Menu List |
PCL Config./Font Page |
PS Config./Font Page |
PDF Config./Font Page |
Hex Dump |
System
Parameter |
---|
Print Error Report |
Auto Continue |
Memory Overflow |
Error Display Setting |
AutoCncl for Prt Job onErr |
Printer Language |
Sub Paper Size |
Default Printer Lang. |
Sleep Mode Timer |
Fusg Off Mode(EnSav)On/Off |
Weekly Timer |
Weekly Timer Code |
Main Power On by Remote |
Ready State After Printing |
Print Compressed Data |
Memory Usage |
Spool Printing |
RAM Disk |
Auto E-mail Notify |
Silent Mode |
Main Pwr Off if Ntwrk Disc (mainly Europe) |
Serial No. of Machine |
[Weekly Timer Code] appears when Weekly Timer is enabled.
[Spool Printing] appears only when the optional hard disk is installed.
[RAM Disk] appears only when the optional hard disk is not installed.
Print Settings
Parameter |
---|
Machine Modes |
PCL Menu |
PS Menu |
PDF Menu |
XPS Menu |
[XPS Menu] appears only when the optional XPS card is installed.
Security Options
Parameter |
---|
Extended Security |
Service Mode Lock |
Firmware Version |
Network Security Level |
Auto Erase Memory Setting |
Erase All Memory |
Transfer Log Setting |
Machine Data Encryption |
Collect Logs |
[Service Mode Lock] and [Machine Data Encryption] appear only when you have logged in as the machine administrator.
[Auto Erase Memory Setting] appears only when the optional hard disk is installed.
Device Setting Information
For details, see "Managing Device Information", Security.
Host Interface
Parameter |
---|
Network Config. Wizard |
Direct Connection Setting |
Smart Device Connector |
I/O Buffer |
I/O Timeout |
DIPRINT Timeout Period |
Network |
Parallel Interface |
Wireless LAN |
USB Port |
USB Settings |
Restore Interface Settings |
[Direct Connection Setting], [Smart Device Connector], and [Wireless LAN] appear when the optional wireless LAN board is installed.
[Parallel Interface] appears when the optional IEEE 1284 interface board is installed.
Language
You can select a display language. Available languages vary depending on the country of purchase.
Installation Settings
For details, see "How to Use Initial Settings for Setup", Setup.