Checking the Auto Erase Memory status
When Auto Erase Memory is enabled, you can use the Memory Erase Status screen to find out whether there is any data to be erased in the memory.
Press the [Menu] key.
Press the [
] or [
] key to select [Memory Erase Status], and then press the [OK] key.
“Currently no data to erase” appears even when the optional hard disk is installed and there is a Sample Print/Locked Print/Hold Print/Stored Print job on the hard disk.
If the Memory Erase Status screen is not displayed, first check if Auto Erase Memory Setting has been set to [Off]. If the screen is not displayed even though Auto Erase Memory Setting is [On], contact your service representative.