Previous
The three-tray wide LCT is identified as Tray 4, Tray 5, and Tray 6.
Check that the paper edges are aligned with the left side.
If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fences may slip out of place.
Check that paper in the paper tray is not being used, and then pull the tray carefully out until it stops.
Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
Carefully push the paper tray fully in.
If you select Paper Weight 5 to 7, [Coated: Glossy], [Coated: Matte], or [Label Paper] in [Tray Paper Settings], air is blown out automatically to fan the paper loaded in the three-tray wide LCT. Fan this paper before loading it. For details, see Fanning the paper.
Various sizes of paper can be loaded in the three-tray wide LCT by adjusting the positions of side fences and end fence. For details, see Changing the Paper Size in the Three-tray Wide Large Capacity Tray.
You can load envelopes in the three-tray wide LCT. When loading envelopes, place them in the correct orientation. For details, see Envelopes.
