Skip header
 

Fanning the paper

Important

  • If you load coated paper, label paper, or thick paper of 163.1–300.0 g/m2 (60.1 lb. Cover–165.0 lb. Index) in the three-tray wide LCT, it is important that you fan the sheets thoroughly. Misfeeds may occur if paper is not fanned thoroughly.

  • If you load coated paper or transparencies in the two-tray wide LCT, it is important that you fan the sheets thoroughly. Misfeeds may occur if paper is not fanned thoroughly.

1Loosen the stack by riffling the sheets.

Illustration of fanning the paper

2Holding its shorter ends, flex the stack back and forth to create space between the sheets. Repeat this several times.

Illustration of fanning the paper

Illustration of fanning the paper

3Make sure there is space between the sheets.

Illustration of fanning the paper