Output tray settings

PreviousNext

This section describes the output tray settings.

• Depending on the type of your machine and the options installed on it, the following trays will be displayed.

  • When Finisher SR5110 or Booklet Finisher SR5120 is installed and [According to Function Setting] is selected for [Output Tray] in [Finisher Output Tray Setting], [Finisher Shift Tray 1] and [Finisher Shift Tray 2] are displayed. ^*1

  • When Finisher SR5090 or Booklet Finisher SR5100 is installed, [Finisher Upper Tray] and [Finisher Shift Tray] are displayed.

  • When Shift Sort Tray SH5000 is installed, [Shift Tray] is displayed.

  • When Stacker is installed, [Stacker Upper Tray] and [Stacker Tray] are displayed.

  • When the second stacker is installed, [Second Stacker Upper Tray] is displayed.

  • When the second stacker is installed and [According to Function Setting] is selected for [Output Tray] in [Stacker Output Tray Setting], [Second Stacker Tray] is displayed.

  • When Interface Box is installed, [Extended Option's Tray] is displayed.

• If you select a setting that uses the finisher, the job might not be delivered to the specified output tray.

  • If you select stapling or punching, the job will be delivered to the finisher upper tray or the finisher shift tray.

  • If you select shift-sorting, the job will be delivered to the finisher shift tray.

  • If you select center stapling, the job will be delivered to the finisher booklet tray.

Type 2, 3, 4, or 5 machines

*1 If [Output Tray] is set to [Auto Change] in [Finisher Output Tray Setting], both [Finisher Shift Tray 1] and [Finisher Shift Tray 2] are displayed as [Finisher Shift Tray].

*2 When the second stacker is installed, [Second Stacker Tray] and [Second Stacker Upper Tray] are displayed.